SET

Perfectly lift your clients natural lashes with Lash Up Pro lash lifting solutions. + 10ml PUMP BOTTLE + EACH LOTION SOLD SEPARATELY + STORE AT ROOM TEMPERATURE + 1 PUMP USED PER TREATMENT

Processing times will vary according to the strength and diameter of natural lashes:

Fine natural lashes 14 minutes

Medium natural lashes 15 minutes

Thick natural lashes 16 minutes

INSTRUCTIONS FOR USE: 

1. Apply gel pads to clients lower lash line, apply tape if needed
2. Apply paper tape to the clients upper lid (horizontally), this will prevent any irritation to the lid as well as assist in easily removing the shield at the end of the service.
3. Apply the adhesive to the back of the shields. Gently lay the shield onto the lid. Pressing and holding in place for 5-10 seconds. Apply additional adhesive if needed.
4. Apply adhesive to the shield, start pulling the natural lashes backwards onto the shield. Ensure the lashes are laying straight and not criss crossed, how the lashes lay on the shield will be how they perm!
5. Using an applicator wands apply solution #1 (perm) to the base and middle of the lashes. Depending on the lashes leave the solution on for 14-16 minutes (pumps). Clients with finer/ thin natural lashes process for 14 minutes, clients with normal to thicker lashes process for 15 minutes, those with course natural lashes process for 16 minutes.
6. Once solution is applied, place saran wrap on top of the lashes. Using an applicator wand gently message the solution into the lashes.
7. Once the duration has passed, remove the saran wrap and solution from the lashes.
8. Using an applicator wands apply solution #2 (set) to the base and middle of the lashes. Depending on the lashes leave the solution on for 14-16minutes (pump). Clients with finer/ thin natural lashes process for 14 minutes, clients with normal to thicker lashes process for 15 minutes, those with course natural lashes process for 16 minutes.
9. Once solution is applied, place saran wrap on top of the lashes. Using an applicator wand gently message the solution into the lashes.
10. Once the duration has passed, remove the saran wrap and solution from the lashes.
11. Using an applicator wands apply solution #3 (nourish) to the base and middle of the lashes.
12. Once solution is applied, place saran wrap on top of the lashes. Using an applicator wand gently message the solution into the lashes, leave solution with saran wrap for 1 to 2 minutes.
13. Step #3 (nourish) will assist in lifting the lashes from the shield. We recommend using argan oil (sold through Lash Up Pro as Dolly Lash Nourishing Oil) to further assist in lifting the lashes from the shield.
14. Remove tape and shield from clients lid!